Be it agriculture, transport, construction, landscaping, mining, quarrying, forestry, public utilities or any other specialised application, the HEMAN 175 Skid Steer Loader, along with its range of attachments, is a perfect profit earning tool.

Backhoe
Backhoe equipment is a working attachment for skid-steered loader intended for digging canals, trenches and ditches, for demolition and dozing work. Sturdy design of the backhoe equipment makes possible full utilization of the loader force, the side shifting its maneuvering ability in narrow spaces and in proximity of walls and other obstructions. The backhoe control is possible to perform according to the customer's wish from the outside seat or directly from the loader cabin.

TOP

Pallet Fork
Pallet fork is determined for manipulation with palleted materials and to transport these materials to shorter distances on narrow solid roadways, in building stock yards and storages. Especially advantageous, when using loader together with the pallet forks in limited spaces. Move bulky or palletized material easily. Hook on a pallet fork and move your bagged or bulk material fast. In industrial plants and landscaping, handle baled or pallet materials.

• Distance between 2 tynes varies from 20mm – 1350mm depending on various lifting loads.

• Overall height – 920mm

• Length along the top of tyne- 1060mm and Width of 75to100mm

TOP

Auger
Dig 4inch to 24inch holes with speed and plumb-line accuracy. The heavy-duty hydraulic auger bites in with high torque power.

• Augers 100mm-600mm Dia

• Auger Cutting Head 12mm thick, auger flights 6mm thick

• Digs 1.5 m deep without extension up to 300mm dia and 2.0m deep

• 50.8mm AF hex output shaft

• Max Torque 2500 Nm

• Max Output speed 74 rpm

• Max “pull out” 6 ton

• Hyd Flow 40-76 lpm

• Max Pressure 207 bar( 3000psi )

• Extensions from 500mm to1500mm are available

• Removable earth teeth or tungsten carbide teeth can be fitted. Rock teeth also available.

TOP

Sweeper Collector
Sweep clean, scrape mud going forward or in reverse. Ideal for construction, industrial or municipal jobs, the sweeper is easy to attach and simple to operate. The reversible cutting edge helps cut loose caked-on mud, while the Sweeper's poly/wire bristles deposit dirt and debris in the container which can be dumped when full.  

• Operates in forward or reverse direction

• Sweeping widths 1600mm available. Optional higher width available.

• Poly/wire ratio 1:1 for better life available. This ratio can be altered to suit your requirement.

• Approx Capacity 0.2Cum

• Hyd Flow 35-90lpm

• Max Pressure 207 bar( 3000psi)

• 325-360 Kg unloaded

• Optional Gutter Broom available. The holes for the side broom are predrilled on all bucket.

TOP

Trencher

• Trench widths 100-350mm (4"-14")

• 900mm OR 1200mm or 1500mm digging depth (3' or 4'or 5’) at 50°angle in ground

• Full manual side shift

• Twin clearing augers standard, crumber bar fitted as standard

• Heavy duty bolts for chain tensioning

• Hyd. flow 40- 100lpm (10-34gpm)

• Max Press. 260bar (3770psi)

• 2" pitch chain, 22680kg (50000lb) breaking strain

• Sprockets manufactured from 360 Brinell wear plate.

• Robust, high quality motor drives the chain via a drive shaft and drive sprocket

• The nose sprocket, idler sprocket and auger clearing sprocket bearings are all triple sealed to help achieve a long service life.

• The overall length of the 900mm dig depth trencher (with crumber bar folded back) is 2200mm making possible to fit the trencher width across the back of a truck.

• Mass of the trencher with 150mm chain is 350 Kg

TOP

Vibratory Roller

• Drum width 1200mm or 1600mm
  (48" or 63")

• Smooth drum or foot pad

• Rubber mountings ensure 97% vibration isolation.

• Vibration frequency 2500vpm
  (or 1800vpm for pad foot)

• Vibration Amplitude 0.8mm
  (or 1.2mm for pad foot)

Ideal as an alternative to hiring a 2 tonne self propelled roller

TOP

Debris Scraper (Under Belt Cleaning)

• Perfect for cleaning debris from underneath conveyer belts where a loader cannot reach.

• Broom pivots hydraulically to avoid conveyer supports

• Maximum reach 2800mm (110")

• 1.0654 pitch chain fitted with (33) off 350mm wide paddles

• Robust hyd motor directly drives the chain via a drive shaft. This design reduces wear parts( gear boxes)

• High grade wear plate is fitted at the top and bottom of the boom and scraper main frame to combat wear caused by the chain traveling over those areas.

• Optional electric/hydraulic controls

• Hyd. flow 40-100lpm (10-26gpm)

• Max Press. 260bar (3770psi)

• Mass is 380 Kg

TOP

Grader

• Turn your skid steer into a mini grader Blade width 2100mm or 2500mm(84” or 98”)

• Electric over Hydraulic controls.

• Hydraulic blade depth and slew.

• Manual or Hydraulic blade side shift.

• Adjustable blade rake angle.

• Blade slew +/- 45°, maximum cutting depth 250mm (10").

• Pivoting Quick Hitch frame and "floating" front wheel beam allows a level cut to be maintained despite uneven, uncut ground.

• Flow control valve ensures precise control of all functions.

• Can have laser levelling equip.fitted.

• The bolt on grader blade cutting edge is reversible

• The front axles are free floating to follow the ground contours and the two pneumatic tyres are able to swivel a full 360 Deg

• Mass is 800 Kg

TOP

Double Head Slasher

• Cutting widths 1250mm or 1500mm (48" or 63")

• Adjustable depth 50-150mm(2"- 6")

• Durable blades, available at any agricultural suppliers.

• Can be offset in either direction

• Direct drive hydraulic motors

• Able to cut through small saplings up to 50mm thick.

• Shaft speed approx. 120rpm

• Hyd. flow 45-100lpm (12-26gpm)

• Max Press. 241bar (3500psi)

• Mass is 475 Kg

TOP

Stump Grinder

• Suit hydraulic flow rates from 40 - 130lpm (11 - 34gpm) - Custom built to suit the host machine

• 490 mm (19") cutting tip diameter

• Fitted with (20) tungsten tipped arbor cutting teeth

• Driven by a radial piston motor for high start-up torque and efficiency

• Simplistic design for low maintenance. The host machine controls all movement of the cutting head

• Excavator & backhoe mounted models are available

• Case drain line is required

• Operating pressure 165-220 bar(2400-3200psi)

TOP

Back Fill Blade
Heavy Duty Blade useful for trench back filling as well as excavation and grading

• Useful for cutting and grading as well as backfilling

• 1800 or 2100mm (6'or7') wide blade and pivots left or right from the center of the attachment frame.

• Hydraulic blade slew standard.

• Hydraulic blade tilt available.

• Fitted with reversible bolt on cutting edge

• 450mm high blade with reversible, bolt on grader cutting edge.

• Lock valves fitted to hydraulic cylinders

• Mass is 340 Kg

TOP

Excavation Rippers

• The excavation ripper fits easily to the front of the skid steer loader and has the strength to quickly break up hard ground

• Maximum ripping depth is 300mm

• Maximum ripping width is 1500mm

• Shanks used are genuine ripper shanks with removable points

• Total of 5 tynes positions available with 3 tynes fitted as standard

• Mass: 160 Kg

TOP

Levelling Bar

• 1800 or 2100mm (6 or 7') square

• Two pick up points are fitted which are held in clam of 4 in 1 bucket

• Flat bar (landscaping) or round bar (asphalt) underneath.

• Hard facing in corners means longer life

• Mass: 160 Kg/180Kg

TOP

Industrial Grapple Bucket

• General purpose and scrap grapple available.

• Bucket widths 1600mm-2100mm (63" - 83").

• Single (general purpose) or twin (scrap) independent hydraulic grapples.

• Scrap Grapple Bucket utilize 2 independent clams to contain material such as steel, concrete and rock

• The cut away profile of the bucket facilitates loads, while the depth of the bucket is 950mm ensuring that the bucket holds a generous load.

• Bucket is fitted with a weld on cutting edge. Bolt on edge is also available

TOP

Rotary Hoe (For Cultivation)

• Cutting widths 1250mm or 1500mm (48" or 63")

• Adjustable depth 50-150mm(2"- 6")

• Durable blades, available at any agricultural suppliers.

• Can be offset in either direction

• Direct drive hydraulic motors

• Shaft speed approx. 120rpm

• Hyd. flow 45-100lpm (12-26gpm)

• Max Press. 241bar (3500psi)

TOP

Snow Blower

• Has 2 Augers(11”Dia) and a fan(26”Dia)

• Augers are driven by heavy roller chain

• Augers are made with paddles that break up the snow for easier feeding into the blower.

• Augers protected by separate shear assembly

• Cutting Width 66”or78”

• Hyd flow 14-24 GP

TOP

Hydraulic Rock Breaker

• Extremely compact in terms of operational weight/generated power

• Requires minimal maintenance whilst ensuring high yields

• Hyd oil flow 40-60lpm

• Working Pressure 80/120 Bar

• Stroke Frequency 650/950bpm

• Energy Impact 450/600Joule

• Tool Dia 67.5mm

TOP

Combination Bucket (6IN1)

• The combination Bucket does all the jobs: leveling, dozing, digging, grappling , loading and dumping.

• This makes it the perfect all round attachment whether working for Landscaping, Demolition, Construction or Municipalities.

• The optional bolt on teeth provides greater digging capability

• The combination bucket can be used as a grapple to handle large or oddly-shaped objects.

• Opening the clamshell spreads material evenly

• Overall Width - 28 inches

• Overall Length - 67 inches

• Number of teeth - 8

TOP

Bale Handler

• Transports round bales.

• The bale handler is an efficient attachment for moving round bales from the ground onto a trailer or into a bale feeder.

 

TOP

Utility Fork (Muck Fork with Top Grapple)

• The Utility Fork is ideal for handling bundled material, loose straw, and manure.

• Hydraulically controlled grapple

• Overall Width 1500-1800mm

• Bucket Grapple can also be provided

Bucket Grapple	Fork Grapple

TOP

Tire over Tracks

• Better performance in sand and mud

• Float over soft, sandy, or muddy ground

• Better Traction on slippery surfaces with over tire metal tracks

• Provides tire protection

• Build in length adjustment

• Can be installed in less than 30 min and removed in 10 min.

TOP